FISLY CLASS 2 SPECIFICATIONS

Fisly CLASS 2 specifications are described in the International Rules, Appendix 2 A

CHASSIS

The yacht, fully rigged with a pilot in the cockpit, must not pass between two vertical posts with a 3,65 m gap between them.

BODY

The minimum length of the load bearing portion of the body is 4,15 metres.

Class 2

SAIL

Pilots adjust the total propulsive area according to their own choice for length of mast and sail surface up to a maximum total propulsive area, i.e. sail + mast + boom, which cannot exceed 11,3 square meter. There is no longer any minimum requirement.

MAST

A fluorescent orange strip, 40 mm wide and minimum 2 m long, is stuck on the leading edge of the mast.